CFP Loading Graphic

Find Your Conversion Kit Now

Loading Graphic Bar

Our Natural Gas Conversion Kit

This kit consists of an adapter block that is mounted between the carburetor and the air cleaner. Fuel is then channeled to the proper area in the carburetor so that the original carburetor can control the fuel mixture just the same as running on gasoline. This is the best way to convert your existing gasoline generator into a propane generator, natural gas generator or a tri-fuel generator. Professionals NEVER rely on gasoline as the primary fuel source for their backup generators because of its limited shelf-life and the tendency for this commodity to be hoarded during emergencies and disasters. Now that you have invested in a backup generator, make sure that it runs when you most need it by converting it to use propane, natural gas or even convert it to use all three of the primary fuels (propane, natural gas, gasoline).

Natural Gas Conversion Kit

Natural Gas Generator And Small Engine Conversion kits (also known as Bi-Fuel Conversion kits) enable gasoline engines to run on propane, natural gas and gasoline. Not only is alternative fuel cheaper, it also provides a cleaner environment and longer generator life because natural gas and propane is a much cleaner fuel than gasoline. Practical tests have revealed that the internal condition of an engine operating on dual fuel remains much better than when it is being operated only on gasoline. Engine life is prolonged and the time between overhauls can be increased. Dual Fuel system also minimizes problems associated with storage and handling of gasoline. Equally important, the many advantages of gasoline engines are retained in their entirety with out gumming up the fuel system with gasoline residue.

Why Buy Our Kits?

  • We ARE the Factory & Manufacturer
  • Most People Can Install our Kits!
  • Easy to Install (See Video)!
  • Comes with Do-It-Yourself Step-By-Step Instructions!
  • We Offer Free Technical Support for Conversion Kits and Forklifts!
  • In Stock and Ready to Ship!
  • 18 Months Warranty for Century Products

Tools Needed for Average Installation

  • Screw Drivers (Flat Head and Phillips)
  • Pliers
  • Ratchet Set
  • Crescent Wrench
  • Pipe Wrench
  • Drill

Can't find what you are looking for? Please call us at 734-728-0300 and we can build up a kit for your generator at no extra cost.

After proper installation, if the engine stalls, the fuel will STOP FLOWING between the Regulator and the adapter. Some engine applications (we are unable to determine which makes/models) might have a disturbance in performance when running your unit on gasoline. If this occurs you can remove the adapter temporarily when using gasoline. This will not hurt your engine. We will not be issuing refunds for this reason.

If you can not find what you are looking for, please call us at 734-728-0300. We can custom build up a kit for your specific application!

(In Alphabetical Order)